<< Click to Display Table of Contents >> Navigation:  Alarm Panels > DSC Panels > DSC 9045/9047/9055/9057 (Impassa)

  For complete instructions, click the above links for the pdf manuals. Click Thumbnail for expanded keypad view.

ARMING/DISARMING

ARMING IN STAY MODE

Press and Hold the Stay key for 2 seconds or enter the Access Code and do not leave the premises.

ARMING IN AWAY MODE

Press and Hold the Away key for 2 seconds or enter the Access Code or hit * 0

DISARMING

Enter your Access Code to disarm anytime the system is armed.

DISARMING ERROR

If your code is invalid, the system will not disarm and a 2 second error tone will sound. If this happens hit # key, and try again.

BYPASSING

With the system disarmed.

1.Press * to enter the function menu. The keypad will display "Press * or < > Zone Bypass".

2.Press * then your Access Code (if required). The keypad will display "Scroll to < > Bypass Zones".

3.Use the < > Scroll keys to find the zone to be bypassed, and then press * to select the zone. The keypad will display a "B" to show that the zone is bypassed. If a zone is open (e.g., door with door contact is open), the keypad will display "O" . If you bypass the open zone, a "B" will replace the "O".

4.To unbypass a zone, use the < > Scroll keys to find the zone, and then press * to select the zone. The "B" will disappear from the display to show that the zone is no longer bypassed.

5.To exit bypassing mode and return to the Ready state, press #.

DOOR CHIME

To turn door chime on or off press and hold the CHIME key for 2 seconds, or press * 4.

MEMORY LIGHT

Lights to indicate that an alarm has occurred

1.Press * 3 to view which sensor(s) generated the alarm.

2.Use the < > Scroll keys to view the sensor(s) in alarm memory

3.Press # to exit

4.To clear the alarm memory, arm and disarm the system.

resetting smoke detectors

Feature must be enabled by dealer

Press * 72 on the keypad. If this does not reset the smoke detector, please look here for additional information regarding smoke detectors.

TROUBLE CODES

Press * 2 and then use the < > Scroll keys to scroll  through a list of trouble conditions. Press # to exit trouble display. The 'Trouble' light will stay on until the trouble is resolved.

Time & Date Programming

Press * 6 plus your Master Access Code to enter User Functions. Use the < > scroll keys to find the menu option then press * to select it. Enter the time in 24-hr. format (HH:MM), followed by the date (MM:DD:YY). Press # to exit programming.

PROGRAMMING ACCESS CODES

It is highly recommended that all requests for assistance with access codes be referred to the dealer!

ADDING OR CHANGING CODES

1.Press * 5 plus the (Master Access Code)

2.Enter the 2-digit user number to be programmed (i.e. 06 for user access code 6; enter 40 for the Master Access Code). You can also use the < > Scroll keys to find the specific code and then press the * key to select.

3.Enter the new 4-digit Access Code

4.Enter another 2-digit user number to program, or press # to exit.

ERASING A CODE

To Erase a code, select the code and enter * as the first digit. If * is entered, the system will immediately delete the code and the user will be returned to select another code.