|
<< Click to Display Table of Contents >> PC 9155 (Alexor) |
  
|
|
<< Click to Display Table of Contents >> PC 9155 (Alexor) |
|
This file includes information for the DSC PC9155 (Alexor) |
|
For complete instructions, click the above link for the pdf manual. Click Thumbnail for expanded keypad view.
ARMING/DISARMING
ARMING IN STAY MODE
Press and Hold the Stay key for 2 seconds or enter the Access Code or present your prox tag, and do not leave the premises.
ARMING IN AWAY MODE
Press and Hold the Away key for 2 seconds or enter the Access Code or present your prox tag or hit * 0
DISARMING
Enter your Access Code or present your prox tag to disarm anytime the system is armed. If the keypad is in sleep mode, press any key to wake it up, then enter your Access Code or present your prox tag.
DISARMING ERROR
If your code/prox tag is invalid, the system will not disarm and a 2 second error tone will sound. If this happens hit # key, and try again.
BYPASSING
With the system disarmed.
1.Press * to enter the function menu. The keypad will display "Press * or < > Zone Bypass".
2.Press * then your Access Code (if required). The keypad will display "Scroll to < > Bypass Zones".
3.Use the < > Scroll keys to find the zone to be bypassed, and then press * to select the zone. The keypad will display a "B" to show that the zone is bypassed. If a zone is open (e.g., door with door contact is open), the keypad will display "O" . If you bypass the open zone, a "B" will replace the "O".
4.To unbypass a zone, use the < > Scroll keys to find the zone, and then press * to select the zone. The "B" will disappear from the display to show that the zone is no longer bypassed.
5.To exit bypassing mode and return to the Ready state, press #.
|
Bypassed zones are automatically canceled each time the system is disarmed and must be bypassed again, if required, before the next arming. |
DOOR CHIME
To turn door chime on or off press and hold the CHIME key for 2 seconds, or press * 4.
MEMORY LIGHT
Lights to indicate that an alarm has occurred
1.Press * 3 to view which sensor(s) generated the alarm.
2.Use the < > Scroll keys to view the sensor(s) in alarm memory
3.Press # to exit
4.To clear the alarm memory, arm and disarm the system.
resetting smoke detectors
Feature must be enabled by dealer
Press * 72 on the keypad. If this does not reset the smoke detector, please look here for additional information regarding smoke detectors.
TROUBLE CODES
Press * 2 and then use the < > Scroll keys to scroll through a list of trouble conditions. Press # to exit trouble display. The 'Trouble' light will stay on until the trouble is resolved.
Click to View Trouble Conditions
|
Time & Date Programming
Press * 6 plus your Master Access Code to enter User Functions. Use the < > scroll keys to find the menu option then press * to select it. Enter the time in 24-hr. format (HH:MM), followed by the date (MM:DD:YY). Press # to exit programming.
PROGRAMMING ACCESS CODES
It is highly recommended that all requests for assistance with access codes be referred to the dealer!
ADDING OR CHANGING CODES
1.Press * 5 plus the (Master Access Code)
2.Enter the 2-digit user number to be programmed (i.e. 06 for user access code 6; enter 40 for the Master Access Code). You can also use the < > Scroll keys to find the specific code and then press the * key to select.
3.Enter the new 4-digit Access Code
4.Enter another 2-digit user number to program, or press # to exit.
|
Take special care when changing the Master Code. Errors changing the Master Code will likely require a service call from a technician to correct. |
ERASING A CODE
To Erase a code, select the code and enter * as the first digit. If * is entered, the system will immediately delete the code and the user will be returned to select another code.
