|
<< Click to Display Table of Contents >> Advent |
  
|
|
<< Click to Display Table of Contents >> Advent |
|
This file includes instructions for the GE Advent panel. |
|
For complete instructions, click the above link for the pdf manual. Click Thumbnail for expanded keypad view.
ARMING/DISARMING
ARMING IN HOME (STAY) MODE
1.From the main menu, press 1 + 2 keys.
2.Enter your Access Code, if prompted.
3.Press the * key twice to exit.
ARMING IN AWAY MODE
1.From the main menu, press 1 + 3 keys.
2.Enter your Access Code, if prompted.
3.Press the * key twice to exit.
DISARMING
1.From the main menu, press 1 + 1 keys.
2.Enter your Access Code, if prompted.
3.Press the * key twice to exit.
Canceling an alarm
Enter your Access Code within 5 seconds (programmable) of the alarm start.
Doing this will prevent Police and/or Auxiliary/Medical type alarms from reporting to the monitoring station. Fire alarms will still report. Advise the monitoring station if the alarm is false.
BYPASSING
Automatic Bypassing
To bypass a door or window for this arming session only.
1.Press 1 key, then press a number from 1 to 5, indicating the desired arming level.
2.Enter your Access Code.
3.Press 1 key to accept the open sensor.
The sensor stays bypassed only until the system is disarmed.
Manual bypassing
To bypass a door or window indefinitely.
1.From the main menu, press 1 + 7 keys.
2.Enter your Access Code.
3.Enter the desired Zone Number to be bypassed and press # (Enter).
The sensor stays bypassed until you unbypass the sensor using the same method.
Manually Resetting smoke detectors
Manually resetting a smoke detector following a test or alarm resets tripped detectors. This procedure is rarely needed because smoke detectors are automatically reset when an alarm is acknowledged or canceled.
1.From the main menu, press 8 + 9 keys.
2.Enter your Access Code.
DOOR CHIME
To turn door chime on or off, press the 1 + 7 buttons (from the main menu).
Checking the system status
When you want to know the current status of the system including its arming state and any current problems.
1.Press 1 + 9 keys.
2.Press UNDO ( * ) to quit.
|
PROGRAMMING Access CODES
It is highly recommended that all requests for assistance with access codes be referred to the dealer!
adding new Access Codes
1.From the main menu, press 1 + 8 keys.
2.Enter your Primary Access Code.
3.Press 1 key.
4.Enter the New Access Code and press # key.
5.Enter New Access Code again, and press # key.
6.Press * key twice to exit.
Changing an Access Code
1.From the main menu, press 1 + 8 keys.
2.Enter your Primary Access Code.
3.Press 4 key.
4.Enter the Access Code to be changed and press # key.
5.Enter New Access Code, and press # key.
6.Enter the New Access Code again, and press # key.
7.Press * key twice to exit.
Deleting an Access Code
1.From the main menu, press 1 + 8 keys.
2.Enter your Primary Access Code.
3.Press 2 key.
4.Enter the Access Code to be deleted and press # key.
5.Press * key twice to exit.
