|
<< Click to Display Table of Contents >> Allegro |
  
|
|
<< Click to Display Table of Contents >> Allegro |
|
This file includes instructions for the GE Allegro panel. |
|
For complete instructions, click the above link for the pdf manual. Click Thumbnail for expanded keypad view.
ARMING/DISARMING
ARMING IN STAY MODE
Press the Arm button and then enter the Access Code.
ARMING IN AWAY MODE
Press the Arm button TWICE and then enter the Access Code.
DISARMING / Canceling alarm
Press the Disarm button and then enter the Access Code.
BYPASSING
Bypassing a Sensor Directly
Use this method if the system is armed and you would like to open a window without disarming.
1.Close all doors and windows.
2.Arm your system to the desired level.
3.At any touchpad, press # (# is labeled Bypass).
4.Touchpads display, “ENTER CODE TO BYPASS". Enter your Primary Access Code.
5.Use the Up Arrow / Down Arrow keys to scroll through the listed sensors.
6.Press Select to select the sensor to be bypassed.
7.The panel displays "ZONE XX OFF" (bypassed) and the Press Status icon will turn on (the status message will include bypassed and open sensors).
8.The bypassed door or window can now be opened.
Bypassing a Sensor Indirectly
Use this method if you are arming the system and would like to bypass doors and windows already open.
1.Leave open only those doors and windows that are to remain open. Close all others.
2.Arm your system to the desired level. The touchpad emits protest beeps and displays “PROTEST,” and "ZONE XX OPEN".
3.Press # (Bypass) to bypass immediately, or allow the delay time to expire and the sensors will bypass automatically.
4.The system sounds arming level beeps to indicate that the system is armed and open sensors have been successfully bypassed.
|
Heat , Smoke , Carbon Monoxide and DTIM sensors can not be bypassed. |
checking system status
Press *. (* is labeled Status.)
The system sounds beeps according to the current arming level (one for Level 1 [Disarmed], two for Level 2 [Stay], three for Level 3 [Away]). Panel displays the status, including Alarm Memory, Zone Conditions, and Trouble Status.
DOOR CHIME
System must be disarmed
To turn door chime on or off, press the Chime button. When on the panel display will alternate between the the current time and CHIME ON.
Programming SYSTEM TIME
1.Enter the programming mode by pressing 8 + Primary User Code.
2.Scroll down using Disarm button until the time is displayed. Press Select (#) button.
3.Enter the Correct Time in 12-hour format then press Disarm button to select AM or PM
4.Press # to accept the new time.
5.Press * until EXIT is displayed, then press # to confirm.
PROGRAMMING ACCESS CODES
It is highly recommended that all requests for assistance with access codes be referred to the dealer!
Changing primary user code
1.Enter programming mode by pressing 8 + Primary User Code.
2.Press # and then press # again to display the current Primary User Code.
3.Enter the desired Primary User Code.
4.Press #.
ADDING OR CHANGING user codes 2 - 4.
1.Enter the programming menus by pressing 8 + Primary User Code.
2.Press # then press Disarm until the desired code is reached.
3.Press #. to display the current user (2-4) code, if any.
4.Enter the desired User Code.
5.Press #.
deleting A CODE
1.Enter the programming menus by pressing 8 + Primary User Code.
2.Press # then press Disarm until the desired code is reached.
3.Press # twice to delete the code.
