<< Click to Display Table of Contents >> Navigation:  Alarm Panels > GE > ZeroWire

For complete instructions click above link for pdf manual. Click thumbnail for expanded keypad view.

Arming/Disarming

Away Arm

1.Confirm that the READY and STATUS keys are both green.

2.Press the AWAY key.

3.If necessary, enter a User Code, then press ENTER.

4.Leave the premises.

Stay Arm

1.Confirm that the READY and STATUS keys are both green.

2.Press the STAY key.

3.If necessary, enter a User Code, then press ENTER.

4.Leave the premises.

Disarming

Enter a User Code, then press ENTER.

Sensor Bypassing

1.Press the BYPASS key.

2.Enter a User Code (with authority to bypass), then press ENTER.

3.Enter the Sensor Number to be bypassed, then press ENTER.

4.Pressing 0 will toggle between bypassed and unbypassed state.

5.Press the MENU key to exit.

•The Status light will turn yellow to indicate that there are one or more bypassed sensors.

•You can touch the STATUS key to check which sensors are bypassed.

•All bypassed sensors are reset and cleared from memory the next time the system is armed/disarmed.

Sensor Reset

Some detection devices such as smoke detectors, shock sensors, and some glassbreaks will stay in alarm until reset by an authorized user.

1.Press the MENU key, then press 7.

2.Enter the Master Code, then press ENTER.

3.Press the MENU key to exit.

Chime Mode

1.Press the CHIME key.

2.Press 0 to toggle the chime mode on or off.

3.Press MENU to exit.

User Codes

Adding/Changing User Codes

1.Press MENU, then press 3.

2.Enter the Master Code, then press ENTER.

3.Press 1.

4.Key in the User Number you wish to program, then press ENTER.

5.Enter the new 4 digit User Code, then press ENTER.

6.Press the MENU key three times.

Deleting User Codes

1.Press MENU, then press 3.

2.Enter the Master Code, then press ENTER.

3.Press 1.

4.Key in the User Number you wish to delete, then press ENTER.

5.Press the BYPASS key.

6.Press the MENU key three times.